APT Fluorescence Detector

Instant Cleanliness Testing, Anytime，Anywhere

The ATP Fluorescence Detector is a device for the rapid detection of microbial contamination, assessing the microbial content of a sample by measuring the fluorescence intensity of adenosine triphosphate (ATP), which is present in all living cells at a level proportional to the number of living cells. During the test, the reagent reacts with ATP to produce fluorescence, and the instrument indirectly reflects the degree of microbial contamination by detecting the fluorescence intensity. The equipment is widely used in food, medicine, environmental monitoring and other fields, with rapid, sensitive, easy to operate.Protect your health anytime, anywhere with this ATP Fluorescence Detector!

Specification

Display	3.5-inch High-precision Graphic Touch Screen
Processor	32-bit High-speed Data Processing Chip
Detection accuracy	1 × 10-18mol
Coliform	1 – 106cfu
Detection Range	0 -99999 RLUs
Detection Time	15 Seconds
Detection of interferences	±5 % or ±5 RLUs
Operating Humidity Range	20 – 85 %
Operating Temperature Range	5℃ – 40℃
Detection Mode	RLU and Coliform Screening
Instrument size	188 mm×77mm×37mm
Standby state (20℃)	6 months
Charging Method	Rechargeable lithium battery, no battery replacement
USB Interface	Equipped with a mini USB port for uploading results to a computer

Why Choose the ATP Bacteria Detector?

• Practicality
  Upper and lower limit values can be set according to the environmental testing needs to achieve rapid data assessment and early warning, rapid screening of surface cleanliness.
• High sensitivity
  1 × 10-18mol sensitivity
• Fast speed
  Conventional culture method 18-24h or more, while ATP only need more than ten seconds.
• Feasibility
  There is a clear correlation between the number of microorganisms and the ATP contained in the microorganisms. The number of microorganisms in the reaction can be derived indirectly by measuring the ATP content.
• Operability
  Traditional incubation methods are operated in the laboratory by trained technicians, whereas the ATP Rapid Cleanliness Test is very easy to operate and can be operated on-site by general staff with simple training.
• Better Experience
  The flexible plug-and-play design of the test tube allows for regular cleaning and long-term use, extending the life of the instrument.

If you are struggling with cleaning issues in your life, then this Atp Fluorescence Detector is for you!

Key Features

Product Features

1. This atp rapid tester is made of special sealing material to enhance the light avoidance, and the test results are more stable.
2. Simple interface, easy to operate.
3. Bottom detection, not subject to the influence of the instrument handheld or placed at an angle, the detection data without interference, the results are more stable.
4. The integrated case design makes it convenient to travel and carry.
5. Low background value is favorable for the detection of trace ATP.
6. Good reproducibility, providing users with more reliable and accurate data.

User Guidance

caveat

• After removing the swabs from the freezer, leave them at room temperature for about 5 minutes.
• After sampling, the swab test tube can be left in a dark place for about 4 hours.
• Do not touch the swab or swab stick with your hands.
• After the reaction of the cartridge solution in the swab test tube, it should be placed in the fluorometer and read within 15 seconds.
• The swab solution has been diluted and is safe to use on food surfaces.

Factory Photography

Application

Wide range of applications, commonly used in bacterial microbial detection, medicine and health, food safety, market law enforcement, surface cleanliness testing, medical epidemic prevention, water quality and water policy, production line hygiene, industrial water treatment, environmental protection testing, customs and entry-exit quarantine and other law enforcement departments and other industries.

Packing List