Materials	Fabric, PCB, LED, PVC
LED Quantity	2160PCS
LED Source	5050SMD
Input Voltage	AC85-265V
Working Voltage	DC 24V
Power	192W
Dimension	70.9x35inch
Wavelength	660nm:850nm=1:2
Strength Level	5 Levels
Pulse Modes	10Hz, 40Hz
Timing	10-60 Minutes
Controlling	Wired Remote Controller
Irradiance	0inch:>100mW/cm2
EMF	0μT
Certificates	CE RoHS FCC SAA
Beam Angle	120°
Package Size	39×7.9×8.3inch
Gross Weight	5.8 KG
Warranty	1 Year

Dual Wavelength Chip

Chip quality upgrade, dual wavelength 3-in-1 chip compared with single chip products, red light output rate increased, red infrared light output ratio of 660nm:850nm = 1:2, can produce more infrared light.

Skin-friendly Fabric

The body contact surface is made of soft, high transmittance transparent PVC film, which effectively protects the LEDs, is waterproof and easy to clean.The exterior is made of skin-friendly Lycra fabric, which has a certain degree of comfort, but also has high elasticity, strong and durable characteristics.

Increased Aspect Ratio

The size of the cushion is increased to 70.9x35inch, and the longitudinal direction is widened to cover the whole body perfectly to meet the needs of use.

Comes with Adapter

The pad comes with a 27inch 3-hole power adapter cable, which has been tested for electrical safety and not only increases the distance of use, but also makes it easy to store and portable, so it is not easy to lose.

Safety Adapter

Comply with international safety standards, with 6 safety designs, over-current protection, over-voltage protection, short-circuit protection, over-heating protection, over-charging protection, reverse connection protection, has passed CE, ETL, FCC, PSE, GS, RoHS and other certificates, to ensure the safety of your use.

Thick Power Cord

Composed of 3 core wires, the power transmission is more stable. It has been certified by CE, VDE, KEMA-KEUR, which is more secure in terms of safety. It is made of insulating material with good temperature resistance and reliable quality.

Simple Control

The physiotherapy pad is controlled by a simple controller with only 5 buttons, simple operation to customize the use of parameters, such as: power, wavelength, mode, etc., can be quickly get started.

Effective Light

There are 2,160 red light chips and 4,320 infrared light chips in the physiotherapy pad, providing high intensity and efficient red light output.The 660nm red light can target specific problem areas and the 850nm near infrared light can penetrate deeper into the tissue for deeper treatment. More 850nm infrared light allows for more dramatic phototherapy results.

Adjustable Light Source

The Whole Body Red Light Physiotherapy Pads are available in three wavelengths, i.e. single light source (660nm only or 850nm only), and mixed light source (660nm+850nm), to meet your different treatment needs.

Pulse Mode

Pulse flashing gives a short buffer to the skin to avoid skin burns during treatment so that the energy in the red light can be better absorbed, making the treatment more effective. The physiotherapy pad is equipped with two pulse modes, 10HZ pulse and 40HZ pulse, the higher power pulse mode, the better the red light treatment effect brought.

EMF-free

The physiotherapy mat is made of high-quality LEDs and premium fabrics, with near-zero electromagnetic field (EMF) radiation at 0inch, ensuring user safety and comfort.

High Irradiance

The irradiance of the area has been tested to be more than 100 mW/cm², allowing you to enjoy professional-grade red light therapy at home without going to a physical therapy center or spa, and enjoying high therapy at a low price.

Practicality

The Whole Body Red Light Therapy Pads can be used not only lying down but also sitting down, allowing you to have your therapy space all to yourself. The extra large size allows you to use it with your own family, friends and even pets.

Portable and Foldable

The soft fabric of the pad can be rolled or folded, and it comes with two straps for easy storage and transportation.

Six Treatment Modes

1. Red light mode (660nm): press 1 switching key of the controller, only red light is on.
2. Infrared light mode (850nm): Press the conversion key of the controller 2 times, only the infrared light is on.
3. Mixed mode (660nm+850nm): Press the conversion key of controller 3 times, both red light and infrared light will be on.
4. Red light pulse mode (660nm+Pulse): Press 1 switch key of the controller, then press the on/off key to start the pulse mode.
5. Infrared light pulse mode (850nm+Pulse): Press the switching key of the controller twice, then press the on/off key to start the pulse mode.
6. Mixed Pulse Mode (660nm+850nm+ Pulse): Press the switching key of the controller 3 times, then press the on/off key to start the pulse.

Five Treatment Intensities

Press the “+, -” key to select the treatment intensity, there are 5 levels from P1 to P5.
P1:20%, P2:40, P3:60, P4:80%, P5:100%. The higher the power, the higher the brightness, the higher the temperature and the higher the intensity of the red light.We set the product to reach a maximum temperature of 55 degrees, and the continuous warming keeps the physiotherapy mat comfortable during use.

1.Painless and non-invasive
No invasive operation is required, the light shines on the outside of the body and causes no pain, it provides temporary pain relief and speeds up healing time.
2.Drug and chemical free
does not involve any drugs or chemicals, the risk of use and side effects are greatly reduced.
3. Allows for complementary therapies
does not conflict or interact with most other therapies.
4. Non-Ablative
Some laser treatments are ablative, meaning they can damage tissue, but red light therapy is non-ablative; it is gentler, safer, and requires no downtime.
5. Natural
Red light therapy causes a reaction at the cellular level, allowing your body to repair itself.
6.Whole Body Treatment
Physical therapy pads allow you to get full body coverage of red light, which is elevated at high irradiance.

VS
Size	70.9x 35 inches	Half or small size
Peak Wavelength	660nm：850nm=1：2	660nm：850nm=1：1
Certifications	CE,RoHS,FCC,SAA	Little or no
LED	2160 LEDs	Ranging from 100-200
Chip	Triple chip = 6480 LED chips per pad!	Single Chip
Brightness Control	5 types, full user control	Less than 5 types
Irradiance	>100 mw/cm² strong irradiance	Usually unspecified
Warranty Sheet	One year	Usually unspecified
Price	$699	$999to $1299

VS
Health	√	√	√	Ⅹ
Time	√	Ⅹ	Ⅹ	√
Flexibility	√	Ⅹ	Ⅹ	√
Costs	Only $399	More money	More money	More money

• The frequency and duration of use of red light therapy can vary according to individual needs and specific treatment conditions. It is generally recommended to start with short sessions (e.g., 10-30 minutes per session, 3-4 times per week) and then gradually increase the sessions as tolerated by the individual.
• Drink water before and during treatment.
•  It is necessary to do proper cleaning after use to remove surface stains.
• To ensure the longevity of the treatment pad, do not place heavy objects on it as this may cause damage. Please store the treatment pads in a cool dry place away from moisture or heat to prevent any potential damage.

• Our company is a manufacturer specializing in the research, development, production, sales and service of LED red light therapy device. With a complete R&D team, international sales team, purchasing, production, QC and aging test and packaging team to ensure smooth shipment of all our products.
• We have a wide range of red light physiotherapy products covering many functions and models to meet the needs of different users. All of our products have passed the FDA registration report, CE, RoHS, SAA, FCC certifications, and many new product design certification reports. With excellent quality, our products have been sold to more than 120 countries, such as North America, South America, Latin America, Europe and so on.
• We also welcome OEM and ODM orders. Whether you are selecting a current product from our catalog or seeking engineering assistance for your application, you can discuss your purchasing needs with our customer service center.

Our Strengths

Certificate of Honor

Factory Overview

Chip Test

Chip Test

Fabric Assembly

Fabric Assembly

EMF Test

Luminescence Test

Storehouse